"Emma as Cinderella Costume"

Costume Instructions

Costume Materials
Coach Materials

6” of 1” square tubing
10” of ¼” flat bar
1 – 6” 3/8” bolt with nut
31’ – ¼” steel rod
8’ – 3/8” steel rod
2’ – 9/16” steel rod
Steering mechanism and handle from wagon
4 - 10” plastic wagon wheels
2’X2’ 1/8” plywood
1’X1’ of 2” foam (seat cushion)
1 yd red velvet material
4 – 9/16” axle caps
12’ battery operated white lights
2 cans white spray paint
velcro

Horse

12’ – 2”x6” Lumber
4 2” plastic casters (wheels)
14 3.5” wood screws
18 1” wood screws
10” X 3” white vinyl
2’ white fur material
2 yds ½” silky red rope
1 can white spray paint
1 black paint pen
Hot glue

Costume Instructions
Cut ¼” steel rod into 9 – 3’ pieces & 1 – 4’ piece. Take 1 4’ piece and bend it into a circle. This makes the bottom of the carriage. Take 1 3’ piece and make a circle, this makes the top. Take the rest of the 3’ pieces and bend them into quarter circles. Weld the quarter circles to the top and bottom pieces, evenly spaced except for leaving a 12” space on each side for the door openings. Cut 2 4’ pieces from the 3/8” steel rod. Bend ½ circles on each end of the 3/8 rod. Weld the rod to the bottom of the ¼” floor. This makes the frame. Cut 3 pieces of 1” square tubing 6” long. Cut a 9” piece of flat bar. Weld the flat bar across the front of the 3/8 rod. Weld 1 piece of tubing to the middle of the flat bar facing down. Weld the other 2 pieces to the back of the 3/8 facing down. Weld a 20” piece of 9/16 rod to the bottom of the rear tubing. Drill a 3/8 hole through the center of the flat bar. Using a 6” 3/8 bolt, attach the steering mechanism to the front. Slide the wheels on the axle and pound the axle caps on over the end of the axle to secure the wheels. Cut a circle out of the plywood and cover with velvet. Attach to the bottom of the carriage using red wire ties. Cut 12” oval piece of plywood, velvet, and foam. Glue them together. Attach to back of carriage with red wire ties this makes seat. Wrap white lights around each “rib” of the coach and down the reins on each side of the horse. Attach battery packs to the underside of the floor with Velcro.